Skip to content
Andrew Voirol
Thursday, November 19, 2026nocturne-observatory-build

Fixing the glowing chrome ball, tempered glass reflections, and observatory acoustics

WebGPUShadersDesignApple SiliconShipping

First live playtest immediately exposed two things no unit test catches: the chrome pinball looked like a glowing orb, and the observatory ambience sounded like an electrical ground loop. The culprit on the optics side was simple math — PMREM studio strips at 5.2× combined with ballMat.envMapIntensity = 2.65 and a 0.96 bloom threshold pushed metallic reflections past 17.0 linear radiance right into bloom, while point-blank dynamicPointLights at y = 0.085 m blew out bumper clearcoat. Raising bloom threshold to 1.55 (strength = 0.15), dialing ball reflectance back to realistic carbon-chrome (#dfe6f0, envMapIntensity = 1.32), upgrading GlassPane with parallax-shifting reflection bands, and pairing a vaulted starry observatory dome backdrop with 160 drifting gilded dust motes snapped the table into focus. On the audio side, I ripped out the raw 60/120 Hz hum completely, pre-baked a 6-second horological dome room bed with a subtle 60 BPM brass pendulum escapement, and rebuilt flippers around a real two-stage solenoid (t = 0 coil snap + +16 ms End-of-Stroke stop thwack into a 110 Hz wood cabinet resonator).

← Previous

Squashing asymmetrical pocket traps and verifying 391/391 WebGPU E2E checks

Next →

Rain-beaded Tokyo window backdrop, 280 3D rain streaks, and procedural rainfall


Andrew Voirol

Builder, hacker, shipper. Currently leaving localhost.

Navigate

WorkThreadsBuilder's LogAboutContactRSS Feed

Connect

X / TwitterGitHubLinkedIn

© 2026 Andrew Voirol·Back to top ↑
✦Just one prompt away from figuring it all out.